Skip to content

The Pressure of Water: What’s your ideal water pressure rating for your Residence?


There’s nothing better than a relaxing shower that is filled with water that’s high pressure. However, did you know that your water pressure in your home could cause damage to the integrity of your plumbing system? Learn more about the right water pressure settings to your home, and also how to assess your water pressure at home.

What exactly is Water Pressure?

Pressure in water is the quantity of force that is applied to your water’s pressure to push it into the pipes. It is measured as pounds/square inches (psi) and is measured with an instrument.

The pressure of water can be dependent on altitude, demand and build-up of sediment. This could result in the possibility of a blockage to the pipes.

How Do I Check My Residence’s Water Pressure?

The excessive pressure of water may result in destruction to the elastic plumbing lines, such as the hoses of washing machines. The force can trigger rupture of the line , and flood damages to your house.’

A high water pressure could strain the plumbing system. It can increase chances of breaking in your pipes, as well as reduce the longevity for the plumbing system.

Which is the Ideal Pressure of Water for My Residence?

It’s crucial to maintain the pressure of your water in an acceptable level. The optimal water pressure should be between 40-80 pounds/square inch and the suggested house water pressure of 60 PSI.

What can you do to test your home’s water pressure

Below are a few easy methods to check the house’s pressure with water.

  1. If you receive your water through a municipal provider The best place to check your home’s water pressure is to visit a pipe spigot located near the place where the main water supply is able to enter the house. If you do not have an hose bib, you could also check the pressure of your water supply from the machine’s cold water source. Unplug the hose and take care to capture the water that is trapped within the pipe. Connect the gauge to the faucet, then turn it to show the pressure reading.
  2. When testing the pressure of water at the spigot, be sure that water isn’t being utilized elsewhere within the home. Look for areas like washing machines and dishwashers which could be in operation which could cause a false low pressure reading.
  3. Make use of a gauge for pressure that is able to read psi, and then place it on the faucet by hand tightening it to ensure a secure seal. Leaks of water in the course of testing will produce an incorrect measurement.
  4. The faucet should be fully opened. The gauge for pressure should begin to show the water pressure.

Make sure you have the right pressure water By Midwest Plumbing

If you are aware of the reading of your water pressure in your home and you’re able take action to ensure it is with the correct psi. It is possible to do this with a quick adjustment of the water pressure regulator in your house.

But, there are other causes that could cause your home’s pressure to be less than optimal. The low pressure in your water can be the result of blocked water filtering systems, a knot within your main water line or even the flow limiter. The experts with Midwest Plumbing can help determine and correct the source of your low water pressure.

The water pressure issue you are experiencing does not pose any pressure to Midwest Plumbing! Call us at www.midwestplumbing.com to request water pressure service.

It’s hard to beat an inviting shower that has high water pressure. But did you know that your household’s water pressure may cause damage to the integrity of your plumbing system? Learn more about the right water pressure settings to your home, and also how to test your water pressure at home. What exactly is the definition of Water Pressure? The term “water pressure” is the term used to describe the quantity of pressure in a given area.