AVOIDING WATER PRESSURE LOSS IN YOUR Indianapolis SHOWER
Any loss in shower water pressure is an annoyance, even if it’s simply a brief disruption due to a flushed toilet. If it’s a chronic issue that makes it more difficult to wash away shampoo and soap, and of course it’s much worse. There are a number of methods of repairing and preventing this common issue, but they differ depending on the root cause.
Pressure Balancing Valve Limitations
If your shower has a pressure balancing valve– where there’s a single knob or handle to manage both the temperature and flow of water– you’re most likely at threat of water pressure interruptions due to using other neighboring fixtures. When a flushing toilet triggers both a water temperature change and a drop in pressure, the timeless example is.
When the toilet flushes, cold water is diverted to refill the tank, which causes a pressure drop in the cold water line. It takes a pressure balancing valve a couple of seconds to adjust, throughout which time the water may turn really hot due to the fact that the valve isn’t really getting all the cold water it needs.
Fortunately, there’s another kind of shower valve that permits you to prevent this issue totally. It’s called a thermostatic blending valve, and it offers separate controls for water temperature and pressure. Call your trusted plumber to inquire about upgrading to one of these valves.
Malfunctioning Diverter Valve
You probably have a diverter valve– a knob or switch that diverts water from the bath tub faucet up to the showerhead if you have a tub and shower combo. These valves can break or malfunction after numerous years of service, and the outcome could be that the valve cannot open enough to send full water pressure to the showerhead.
If water flows from the bathtub faucet at full pressure but fails to match that pressure from the showerhead, this is a likely culprit. A plumber can validate this diagnosis and finish the repair with a replacement diverter valve.
Water Pressure Reduction Valve Needs Adjustment
When your water pressure issue impacts all of the components in your house, the cause could be near the water source. In some houses, a gadget called a water pressure reduction valve is connected to the primary water line near the point where it enters the house. This valve can malfunction, fall or break out of modification– and all three are jobs for a professional plumber.
Broken or Obstructed Pipe
The worst possible reason for a shower pressure drop is a damaged pipeline, given that the resulting leakage could do major damage to an unseen area of your house. If you can hear water running when and where it should not be, or if you suddenly observe dripping or water stains, shut down your water supply at the primary valve and call a plumber for emergency service immediately.
Blocked Pipe or Showerhead
On the other hand, the finest case circumstance is that your showerhead is just dirty and clogged up. To get a close appearance, loosen your showerhead from the wall if possible. You may desire to soak it in a suitable cleansing solution for numerous minutes prior to cleaning all the nozzles completely with an old toothbrush.
You might likewise have mineral deposit build-up inside your pipes if you live in an area with difficult water. This minimizes circulation gradually and will ultimately have an obvious impact on water pressure. This issue can be avoided with the setup of a water softening system, however pipes that are severely blocked might require to be expertly cleaned or replaced.
Cannot find the source of your water pressure problem? Unsure ways to continue with fixing it? Call your local Indianapolis plumbing company and let the pros take on the job.
When the toilet flushes, cold water is diverted to fill up the tank, which triggers a pressure drop in the cold water line. It takes a pressure balancing valve a couple of seconds to adjust, throughout which time the water may turn very hot because the valve isn’t really getting all the cold water it needs. And then when the valve does change, it does so by reducing the pressure coming from the hot water line, resulting in a total drop in pressure.
When your water pressure issue impacts all of the fixtures in your home, the cause might be close to the water source. In some houses, a device called a water pressure decrease valve is connected to the main water line near the point where it goes into the home.